Casa Breco AL 28 AT5/18-2 HUB 20X6 BORE = 12.000 MM H7

Breco

AL 28 AT5/18-2 HUB 20X6 BORE = 12.000 MM H7

Fabricantes :	Breco
Producto :	AL 28 AT5/18-2 HUB 20X6 BORE = 12.000 MM H7
Descripción :	with a 4Js9x 1.8 mm keyway prepared for (2) M3-0.5 mm setscrews centered on pulley face, one aligned over keyway and the other offset 270 degrees (intended for use with 16mm wide belts) Note: H7 is our standard tolerance.
Código interno:	PAR191006
peso (kg)	1

Póngase en contacto con nosotros para realizar un pedido, ofrecerle el mejor precio y tiempo de entrega del número de modelo

Breco - AL 28 AT5/18-2 HUB 20X6 BORE = 12.000 MM H7

,

también puede preguntar si algún otro número de modelo se encuentra. Podemos ofrecer el mejor precio y tiempo de entrega, con una amplia red de distribución de productos en el Mercado de Productos Industriales en México.

VENDEMOS SOLO PRODUCTOS MARCAS ORIGINALES Y NUEVOS.

Nuestra empresa no es un distribuidor autorizado y representante del fabricante de las marcas que se muestran en el sitio web. Las marcas privadas que se muestran en este sitio y las marcas comerciales son propiedad de sus respectivos propietarios.

Más productos Breco

AL 28 AT5/18-2 HUB 20X6 BORE = 16.000 MM H7 with a 4Js9x 1.8 mm keyway prepared for (2) M3-0.5 mm setscrews centered on pulley face, one aligned over keyway and the other offset 270 degrees (intended for use with 16mm wide belts) Note: H7 is our standard tolerance.

DO4491-103910 with a 4Js9x 1.8 mm keyway prepared for (2) M3-0.5 mm setscrews centered on pulley face, one aligned over keyway and the other offset 270 degrees (intended for use with 16mm wide belts) Note: H7 is our standard tolerance.

M 32T10/X4140 with a 4Js9x 1.8 mm keyway prepared for (2) M3-0.5 mm setscrews centered on pulley face, one aligned over keyway and the other offset 270 degrees (intended for use with 16mm wide belts) Note: H7 is our standard tolerance.

T10/2020 (BRECO)V 25 with a 4Js9x 1.8 mm keyway prepared for (2) M3-0.5 mm setscrews centered on pulley face, one aligned over keyway and the other offset 270 degrees (intended for use with 16mm wide belts) Note: H7 is our standard tolerance.

T10/630 (:25) with a 4Js9x 1.8 mm keyway prepared for (2) M3-0.5 mm setscrews centered on pulley face, one aligned over keyway and the other offset 270 degrees (intended for use with 16mm wide belts) Note: H7 is our standard tolerance.

V 32X10X9600 MM with a 4Js9x 1.8 mm keyway prepared for (2) M3-0.5 mm setscrews centered on pulley face, one aligned over keyway and the other offset 270 degrees (intended for use with 16mm wide belts) Note: H7 is our standard tolerance.

V 50,8 T7/8 9601,2 PAZ PAR KEVLAR TPU-ST2 with a 4Js9x 1.8 mm keyway prepared for (2) M3-0.5 mm setscrews centered on pulley face, one aligned over keyway and the other offset 270 degrees (intended for use with 16mm wide belts) Note: H7 is our standard tolerance.

16 T10/2100 BFX with a 4Js9x 1.8 mm keyway prepared for (2) M3-0.5 mm setscrews centered on pulley face, one aligned over keyway and the other offset 270 degrees (intended for use with 16mm wide belts) Note: H7 is our standard tolerance.

16 T10/2470 BFX with a 4Js9x 1.8 mm keyway prepared for (2) M3-0.5 mm setscrews centered on pulley face, one aligned over keyway and the other offset 270 degrees (intended for use with 16mm wide belts) Note: H7 is our standard tolerance.

16 T10/930 BFX with a 4Js9x 1.8 mm keyway prepared for (2) M3-0.5 mm setscrews centered on pulley face, one aligned over keyway and the other offset 270 degrees (intended for use with 16mm wide belts) Note: H7 is our standard tolerance.

AT20/8360-PAZ-V with a 4Js9x 1.8 mm keyway prepared for (2) M3-0.5 mm setscrews centered on pulley face, one aligned over keyway and the other offset 270 degrees (intended for use with 16mm wide belts) Note: H7 is our standard tolerance.

25ATN10 3460 L078 26970 with a 4Js9x 1.8 mm keyway prepared for (2) M3-0.5 mm setscrews centered on pulley face, one aligned over keyway and the other offset 270 degrees (intended for use with 16mm wide belts) Note: H7 is our standard tolerance.

150AT10-15690 with a 4Js9x 1.8 mm keyway prepared for (2) M3-0.5 mm setscrews centered on pulley face, one aligned over keyway and the other offset 270 degrees (intended for use with 16mm wide belts) Note: H7 is our standard tolerance.

BP1607025A with a 4Js9x 1.8 mm keyway prepared for (2) M3-0.5 mm setscrews centered on pulley face, one aligned over keyway and the other offset 270 degrees (intended for use with 16mm wide belts) Note: H7 is our standard tolerance.

27 T5 22 with a 4Js9x 1.8 mm keyway prepared for (2) M3-0.5 mm setscrews centered on pulley face, one aligned over keyway and the other offset 270 degrees (intended for use with 16mm wide belts) Note: H7 is our standard tolerance.