Venta de productos Badger Meter
Badger Meter ha ofrecido a PARMEX durante mucho tiempo precios razonables, así cómo el tiempo de entrega al mercado industrial en México y a todos nuestros estimados clientes. La siguiente lista de productos de la marca Badger Meter ( incluso si algunos no están en la lista) contáctenos para una oferta.
Nuestra empresa no es un distribuidor autorizado y representante del fabricante de las marcas que se muestran en el sitio web. Las marcas privadas que se muestran en este sitio y las marcas comerciales son propiedad de sus respectivos propietarios.
Documentación técnica adicional, hojas de datos, fotos, catálogos
Productos Badger Meter
1001GCN36SVOSGLN36
Process control valve
Type: RC200
Nominal size: 1/4 "
Material Valve housing: stainless steel SS316
Material valve bonnet: stainless steel SS316
Connections: 1/4 "NPT
Trim / Material: size "G"
Kv - value: 0.17
Characteristic: linear
Spindle seal: Chevron rings, PTFE / PFA
Drive: includes spring
Fluid temperature to 200 ° C
Pressure: PN 320
Mounting position: any
More pressure ratings, materials and
Temperature classes available on request
40/16-D/V4-PT-ML/HC-V2 M20AM
M2000 DN 40 dairy fitting
Material and technical data:
Measuring tube: Stainless steel 1.4571
Liner: PTFE
Housing: stainless steel 1.4301
Protection class: IP 67
Connection: screw connection DIN 11851 /
stainless steel 1.4571
(Dairy)
Electrodes: Hasteloy C
Min conductivity. 5 S / cm (20 S / cm demi.
Water)
Measuring range: 0.03 to 12 m / s
Accuracy: ± 0,2% of reading ± 1 mm / s
Nominal pressure: 16 bar
Overall length: 225 mm
Run transmitter: M2000
Mounting: built
Housing: cast aluminum painted in IP 67
Display: LCD, 4 lines / 20 digits,
backlit
Outputs: Analog output 0/4 - 20 mA
: Scalable pulse max. 10 kHz
: Min / Max + Status +
direction indicator
Configuration: 3 buttons
Interfaces: RS 232, Modbus RTU
Leerrohrdet. : On off
Supply: 85 - 265 VAC
9008527MID M 1000 mit Flansch DN 50 ST 37
MID M 1000 with flange DN 50 ST 37
Hard rubber Hastelloy C 230VAC
Magnetic-inductive flowmeters
Type "Magneto Flow M1000 AM".
Transducer: Type II
Process connection: flange EN 1092-1 / St. 37
DN / PN: 50/16
* Measuring range: 3.6 to 1200 l / min
Installation length: 225 mm
Lining: hard rubber
Max. Temp. 80 ° C
Electrodes: Measurement and idle electrodes
Elec Material: Hastelloy C
Housing: St. 37 painted gray
Transmitters: Type M1000 AM
Assembly: Assembled version
Software language: English / German
* Units: Metric
Current output: 0 / 4-20 mA
* Endwertskala: standard (2.5 m / s)
Pulse output: 24 V DC active / passive
* Pulse rate: 1 PPL
LCD display: 4 lines
Read flow: 8 digits (unidirectional / bidirectional)
2 totalizers: 14 digits
Protection: IP 67
Power supply: 92 to 275 VAC
Min.Leitfähigkeit: 5 microS / cm
Accuracy: +/- 0.3% of the measured value
CABLE
SN: 0506-067 0-75 meters for DN 50 Electromagnetic Flowmeter 3 x (2 x 0.25 mm²) + Ground of 160 Ω / km
LIQUID FLOW METER RCDL M70, WITH PULSE GENERATOR PFT-1E.
Body: Bronze
Measuring chamber: Vectra
O-rings: Viton
Measuring range: 18 - 265 l / min
Accuracy: + / - 1.5% of the value
p-max: 16 bar
t-max: 120 ° C
Connection: R 1 1/4 "male
Length: 273 mm
Mounting position: horizontal, vertical
Pulse Output: Transistor NPN open
Scale Factor: 0.00001 to 0.9999
Supply: 12-24 VDC
MID 2-25/16-F/ST-HG-MEL/HC-ST M15D obsolete, replacement MID 2-25/16-F/St-HG-MEL/HC-St M10DM
(P/N 9005257)
M1500 (24 VDC)
MID M 1000 MIT FLANSCH DN 32 HARTGUMMI HASTELLOY C 24VDC
Magnetic flowmeter Magneto Flow
Type II DN 32 / PN 16 with transmitter for M2000
full pipes.
MARCAS POPULARES
×